Name: Powerex MH-C9000PRO Professional Charger-Analyzer
SKU: 5f6b1b727de79000380f5826
Price: 448.0 HKD
Availability: InStock

Description

Powerex MH-C9000PRO Professional Charger-Analyzer

The Powerex MH-C9000PRO Professional Charger-Analyzer is one of the most advanced chargers on the market and it is suitable for enthusiast, tech-savvy, and professionals. It charges 1 to 4 AA and AAA NiMH/NiCD rechargeable batteries via 4 independent charging slots in about 1 hour. The charger is compact sized, measuring at 4.25” x 4.25” x 2” (LWH) and has a large backlit LCD screen with an on and off option. There are ten selectable charge and discharge rates from 0.2A to 2.0A and 0.1A to 1.0A respectively. The charger has 4 Modes of operation: Charge, Break-In, Discharge, and Refresh & Analyze; which means that in addition to charging batteries, it can also analyze the health of the batteries. With the MH-C9000PRO Professional Charger-Analyzer, the “bad battery” guessing game is finally over!

* Batteries NOT included (Special promotion: Add HK$100 for 8 pieces of made in Taiwan Powerex Precharged 2600mAh NiMH AA batteries in 8-cell battery case)

Features:

4 independent charging slots for AA/AAA NiMH Rechargeable Batteries
4 Modes of Operation: Charge, Break-In, Discharge, and Refresh & Analyze
Memory Settings: Remembers the last settings that were used
Easy Setup: Set settings for 1 slot and apply same settings to all slots
Large backlit LCD display with On/Off option
Displays Capacity, Voltage, Time, and Rate
Optional car adapter (sold separately)
Made in Taiwan
3 Years Limited Warranty

Youtube instruction

Specifications:

Supported Batteries	AA / AAA
Number of Cells	1 to 4
Supported Battery Chemistry	NiMH / NiCD
Charge Time	1 Hr
Charge Rate	Programmable from 0.2A to 2.0A in increments of 0.1A
Discharge Rate	Programmable from 0.1A to 1.0A in increments of 0.1A
Battery Conditioner	Yes
Display Type	Backlit LCD
Charger Input Voltage	DC: 12V 2.0A
Power Supply Input	AC: 100-240V 50/60Hz
Car Adapter	Yes (Sold Separately)

4 Operational Modes:

CHARGE MODE

- Charging current adjustable from 0.2A to 2.0A in 0.1A increments.
- Useful when battery needs to be recharged without determining the capacity of the battery. It should be used on batteries known to be in good condition and have been in continuous use.

BREAK-IN MODE

- Applies a 16-hour 0.1C charge (0.1 times the capacity of the battery), rest for one hour, followed by a 0.2C discharge, rest again, and finally a 16-hour 0.1C recharge again.
- This process is also known as “Forming Charge.” Also recommended with batteries that cannot be rescued by the Refresh & Analyze mode.
- The process follows the IEC standard for determining battery capacity.

DISCHARGE MODE

- Discharging current adjustable from 0.1A to 1.0A in 0.1A increments.
- Useful for analyzing the amount of charge stored in the battery. Battery not recharged at the end of the cycle.

REFRESH & ANALYZE MODE

- First recharges the battery, rest for two hours, discharges, rest, then recharges again. Charging and discharging rates are programmable.
- Reports the discharge capacity at the end of the cycle.
- Useful when the battery capacity needs to be determined. Also useful for battery with degraded performance.

Powerex MH-C9000PRO Professional Charger-Analyzer

Description